in MS-DOS mode and run ScanDisk /all /surface. This will take a little longer, but it will ensure that your hard disks are in good shape. If, after running ScanDisk with these options, Setup still won't continue, you should run Setup /is to bypass ScanDisk.NOTE: Bypassing ScanDisk is not recommended and should be used only if you are positive your disk(s) contain no errors. If there are still errors, Setup may fail and your computer may no longer start.Windows Setup Error-------------------"Setup cannot continue on this system configuration. Click OK to quit Setup. Then refer to Section 'Norton Bootlock' in Setup.txt for instructions." Norton Bootlock is a feature of Norton Your Eyes Only. This message indicates that you need to use the Norton BootDisk you created with Norton Your Eyes Only to remove this feature. Restart your computer with the Norton BootDisk and then follow the instructions on the screen. When this step is finished, run Setup again.MWAVE Modem Driver - IBM ThinkPad Model 600, 600E, 770X and 770Z----------------------------------------------------------------If you have one of these models please check the version of the Mwave Modem driver. To check the version, select [[Start]-[Program]-[Programs]-[ThinkPad Modem]-[Modem Quick Test].The version appears as 'ThinkPad Modem 2.50 Build 16'.If the Version is 2.60 Build 36 or older, you need to update your MWAVE Modem driver. Please read UPDATE.TXT in the "DriverModemIBM" on your CD before upgrading to Windows Millennium Edition.To Update:If your driver is version 2.35 or 2.36:1. run the Setup.exe program located in the folder labeled "DriverModemIBMOLDMWAVE".2. When you are prompted with "Do you wish to continue your software upgrade now?", click 'Yes'. This requires a system reboot once completed.3. When you are prompted to provide the folder name for the new driver, enter "DriverModemIBMDisk1" and then "DriverModemIBMDisk2".4. You can now proceed with the...
