develop film you will need to load film into developing tank in total darkness. After tank is loaded lights may be turned on. Set timer for the film being used. Add developer to tank; consult film and chemical insert for time and temperature used. Agitate every thirty seconds. Drain developer back into developer jar, rinse in luke warm water, and drain. Add fixer solution to developing tank, leave in for 2-4 minutes, and agitate every minute. Drain fixer and return to jar. Rinse film in luke warm water for five minutes, and then hang to dry. Allow film to dry for several hours before doing any printing with it. To make prints of your negatives, you will need an enlarger, safe light, four pans, paper frame, and chemicals used to make prints. Taking a basic photography course or buying a book on basic darkroom techniques can also be very helpful....
