SIDE-DOWN on a suitable place on the mainboard.Prepare 4 isolated wires, by cutting the enclosed long wire into 4 parts.Solder the parts to Pin 1, 5, 6, 8 on the chip.Solder the other ends of the wires to the soldering points on the mainboard which are indicated by the arrows on the enclosed installation pictures.The Pins of the chip must be completely isolated from all metal parts of the mainboard and from the metal plate at the PSX bottom! (use a self-adhesive plastic sheet to isolate the chip)Re-assembly:Re-assembly is to be done exactly in reverse order.______________________________________________________________________________________________________For Plugmod types of modchips (that plug into theback of the PSX) :PlugMod InstructionsSwitch Down = PlugMod OFFSwitch up = PlugMod ON (On screen controls for every feature of the PlugMod)Keys:Circle = Select (or Forward), X = Cancel (or Back), Triangle = Delete, Square = Edit CodesNormal Start:PlugMod Side Switch in the Down position - This Starts normal games with no codes, just like the playstation would if the PlugMod was not in the system except it also bypasses the white and black screensStart game with code (Side Switch in the UP position):This will load the game using the codes you have selected. The currently selected cheat title appears at the bottom of the menu.Select Cheat Code:This takes you to a list of all the codes that are in the PlugMods memory. Move up and down on your controller to highlight a game of your choice and press the "O" key. This will bring you to a list of codes for that game. Move up and down to highlight a code, press the "O" key to select (or unselected) a code. The "+" symbol will show up to let you what code is active. You can obtain cheat codes from http://www.datel.co.uk/psx/psxusind.htm and many other sources on the internet. Add a Code:Before adding new codes with your controller you must DELETE codes because the PlugMod is shipped with the ma...
