ce with a high pH is less likely to corrode the pipes in your home and in any other pipes which supplies water. An area with a lower pH level is more corrosive to your pipes. The composition of pH in tap water varies enormously from location to location depending on the source of the water and water treatment process. My freshwater test kit uses Zero as most acidic and 14 as most Basic in accordance with the color chart.Hardness (GH-KH)Water hardness is measured by the amount of calcium and magnesium salts in water. This natural property of water is demonstrated by the fact that soft tap water foams much easier when soap is added when magnesium and salts are not presented, then in salt water or water that is hard. Calcium and magnesium salts of sulfate, nitrates and chloride are very soluble and are therefore a relatively stable component of water hardness. The amounts in which these salts are presented are called the permanent hardness, which is part of the general hardness. The parts that consist of salts that have a low solubility and are therefore an unstable component of the GH. This unstable part is called the carbonate hardness or KH, Since the salts involved are carbonates of magnesium and calcium The test kit that is used uses a system of drops in coordination with a color chart. You are to count the number of drops put into the 8 cm of water until the water turns into the color on the chart. Then you are to compare the number of drops added to another chart that shows how hard the water is. NitritesAmmonia in water naturally occurs as the result of waist from fish. When dissolved in water it can turn the water toxic. Like ammonia, Nitrites can deem water undrinkable. Nitrites are chemicals that can be dumped or seep into the water. Nitrites are found in things like fertilizers and is a chemical used to package meat. It is important to monitor Nitrites because it has shown in tests that it can cause cancer. The Nitrites on my o...
