switch and the other 2 wires are connected with a jumper wire already on the harness. If you find out there are driveability problems, you may have to also connect the neutral switch on the tranny. Install the clutch cable cover. Do this now unless you have an aftermarket clutch cable that adjusts on the fork. Adjust the cable first, then put the cover on. Fill the transmission with ATF fluid. I like doing this at this point since the exhaust isn't in the way yet. Change the AOD speedometer gear to a T5 speedometer gear. There is a different gear for different differential gear ratios. Consult your SVO supplier for the proper gear. Install the driveshaft. Torque the bolts to 70-95lbs. Install the H-pipe. Install the O2 sensors. ...
