zing recorded CDROM as the medium of interchange; for this purpose it specifies the functions to be provided within systems which are intended to originate or receive CDROM which conform to this Standard [3].3.5.30 UPC StandardsThere are standards involved for making the barcode that is used in the UPC tag.3.6 Product Phases 3.6.1 ResearchThe research phase begins at zero months and ends at six months. Some of the things that will be researched are an implementation of the UPC reader, data storage device, cooking module and platform requirements necessary for control and input and output.3.6.2 DevelopmentThe development phase begins at two months and ends at the 8 months. The control architecture, UPC reader, microwave generation module, data storage, and CDROM interface will be developed during this phase.3.6.3 DesignThe design phase begins at six months and ends at twelve months.The design phase covers all modules of the SmartWave. The modules are the control module, the input output module, the microwave generation module, and the software module.3.6.4 Implementation Implementation starts at eight months and ends at fourteen months. The implementation phase will cover all modules of the smart-wave.3.6.5 TestingTesting starts at twelve months and ends at eighteen months.Unit Testing will begin on each module separately as it is implemented. Once each module has satisfactorily passed each unit test, the modules will be integrated and tested together.3.6.7 Production DevelopmentProduction Development starts at fourteen months and ends at twenty months.3.7Installability Requirements.Installation should be a relatively simple process. All a person is required to do is remove the SmartWave from the shipping box and plug it into the wall outlet. The SmartWave is then ready to use.3.8Support Requirements3.8.10Phone SupportPhone support will be provided by a 1-800 Number. Customers will then be directed by an automated system to...
